Soap dies supplier Eurostampi for soap stamping machine
     
 

Soap die set for type of stamper

Eurostampi Srl since its foundation 1950 is specialized in the design and construction of die-set for soap of every type, perfectly respecting the specifications of the stampers on which they will be mounted, so that it is for different brands the first equipment on new machines.
To keep up with the evolution of stamping machinery we have always updated and improved our design and production systems with the latest generation software and CNC machines,in addition, we produce and design more than 90% of the items internally.
This allow us to make changes or adaptations, even partial, to standard dies based on the customer’s request, such as adaptation holding plates on different models and manufacturers or cooling and air inlet fittings modified for type and position in relation to standards, basically any modification technically possible on requests of our customers to whom we provide technical advice and design.
In this page divided by manufacturer are collected with three-dimensional view almost all the sets that we make for each type of stamper with some description notes.
If the required set, is not in the list do not hesitate to contact us to make according to your specifications the set suitable for your press.
In the sheet of each stamper is present the point "stamping capacity" which has been divided in 5 categories that take into account the general specifications of each model and typical use, the categories are:
  • Handcrafted low production - small local productions or niche soaps of high quality and cost with manual packaging
  • Handcrafted high production - production of high quality soaps also artistic and sculptured with local and global marketing and automated packaging
  • Industrial low production - fully automated soap production with distribution to various markets and price ranges
  • Industrial medium production - fully automated production with soap production also of global diffusion
  • Industrial high production - latest generation of soap stamper able to supply more than 700 soaps per minute thanks to the speed and number of cavities with which they are equipped
To consult the page if you are interested in a specific soap stamper, you can click on the link below in the list of manufacturers.
NOTES:1) on the page there are some manufacturers who have closed their activity, Eurostampi srl continues to provide new dies for stampers even obsolete still in operation.
2) all brass or copper alloy molds can undergo our NIFLON treatment which ensures better soap release and increases wear resistance, 90% of our customers choose this treatment.
Mazzoni LB Binacchi & C. SAS Imsa Soaptec
Sela Generic Pneumatics Milindia Nantong Limac
Meccaniche Mod. Lanzhou Wuxi Jagdish
Soap stamper manufacturer
Mazzoni LB Italy
Stamper model - STU-SL [Ref. 01]
Characteristic notes: soap mold for banded soap, disc die-box in bronze with four openings, brass or copper alloy half dies with cooling circuit, stainless steel plates and accessories, trimmer in stainless steel and centering device in resin
Cavities: 1
Production capacity
Industrial low production
Example of mold made by us STU-SL
Soap stamper manufacturer
Mazzoni LB Italy
Stamper model - STU-S [Ref. 02]
Characteristic notes: single output stamping set for bandless soaps, brass or copper alloy half dies with cooling circuit, loading and unloading system moved by a stainless steel disc-die box with four opening, also in stainless steel the accessories, holding plates, infeed and discharge pusher
Cavities: 1
Production capacity
Industrial low production
Example of mold made by us
Soap stamper manufacturer
Mazzoni LB Italy
Stamper model - STUR14 - DTS [Ref. 03]
Characteristic notes: set for stamper with quick fixing of anticorodal holding plates with special treatment surface, two lower half dies mounted on a single plate, upper dies with double plate, cavity centering by dowel pins, half dies in brass or copper alloy with cooling circuit and air ejectors,two trimmers in Euromuntz with special treatment surface, complete with cooling channels and connectors, rubber spacer for half dies
Cavities: 10
Production capacity
Industrial high production
Example of mold made by us STUR14 - DTS
Soap stamper manufacturer
Mazzoni LB Italy
Stamper model - STUR-12 - DTS [Ref. 04]
Characteristic notes: double line stamping machine, set of mold composed of two lower and two upper half-dies in brass or copper alloy with cooling circuit and air ejectors mounted on anticorodal holding plates with oxidation treatment, trimmers in brass complete with cooling channels and connectors,rubber spacer for half dies and dowel pins
Cavities: from 6 up to 12
Production capacity
Industrial high production
Example of mold made by us STUR-12 - DTS
Soap stamper manufacturer
Mazzoni LB Italy
Stamper model - STUR-10 and STUR-ULTRA [Ref. 05]
Characteristic notes:single line stamping machine with maximum use of working plane,set of mold composed of two upper and lower holding plates in anticorodal with oxidation treatment on which two half dies are mounted, trimmer in aluminium with special treatment surface, complete with cooling channels and connectors,rubber spacer for half dies and dowel pins
Cavities: from 8 up to 14
Production capacity
Industrial high production
Example of mold made by us STUR-10 and STUR-ULTRA
Soap stamper manufacturer
Mazzoni LB Italy
Stamper model - STUR 8 [Ref. 06]
Characteristic notes:double line stamping machine,set of mold composed of two lower and two upper half dies made of brass or copper alloy complete with cooling circuit and air ejectors, four holding plates in anticorodal with oxidation treatment, trimmer in Euromuntz with special treatment surface complete with cooling channels and connectors, dowel pins
Cavities: from 5 up to 12
Production capacity
Industrial high production
Example of mold made by us
Soap stamper manufacturer
Mazzoni LB Italy
Stamper model - STUR 7 [Ref. 07]
Characteristic notes: single line stamping machine,set of mold composed of lower and upper half dies in brass or copper alloy equipped with cooling circuit and air ejectors mounted on anticorodal holding plates with oxidation treatment, trimmer in resin complete with air channels or in brass with cooling system and connectors, dowel pins
Cavities: from 4 up to 9
Production capacity
Industrial medium production
Example of mold made by us STUR 7
Soap stamper manufacturer
Mazzoni LB Italy
Stamper model - STUR 6 [Ref. 08]
Characteristic notes: single line stamping machine,set of mold composed of lower and upper half dies in brass or copper alloy equipped with cooling circuit and air ejectors mounted on anticorodal holding plates with oxidation treatment, trimmer in resin complete with air channels or in brass with cooling system and connectors, dowel pins
Cavities: from 4 up to 8
Production capacity
Industrial medium production
Example of mold made by us
Soap stamper manufacturer
Mazzoni LB Italy
Stamper model - STUR 4 [Ref. 09]
Characteristic notes: similar to STUR 6 but smaller in size, single line stamping machine,set of mold composed of lower and upper half dies in brass or copper alloy equipped with cooling circuit and air ejectors mounted on anticorodal holding plates with oxidation treatment, trimmer in resin complete with air channels or in brass with cooling system and connectors, dowel pins
Cavities: from 3 up to 6
Production capacity
Industrial medium production
Example of mold made by us STUR 4
Soap stamper manufacturer
Mazzoni LB Italy
Stamper model - STUR 3 [Ref. 10]
Characteristic notes: set of mold composed of lower and upper half dies in brass or copper alloy equipped with cooling circuit and air ejectors mounted on anticorodal holding plates with oxidation treatment, trimmer in resin complete with air channels or in brass with cooling system and connectors, dowel pins
Cavities: from 2 up to 6
Production capacity
Industrial low production
Example of mold made by us STUR 3
Soap stamper manufacturer
Mazzoni LB Italy
Stamper model - STUF Quater [Ref. 11]
Characteristic notes: set of mold with disc die-box in st. steel with eight double openings for stamping bandless soaps, the disc rotates 90 degrees to carry out the soap bar loading phases,stamping and soap unloading, set composed of half dies made of brass or copper alloy with cooling circuit and air ejectors,holding plates in stainless steel, expeller cleaner support and accessories
Cavities: 4
Production capacity
Industrial medium production
Example of mold made by us STUF Q
Soap stamper manufacturer
Mazzoni LB Italy
Stamper model - STUF Q Banded Soap [Ref. 12]
Characteristic notes: set of mold with loading and unloading phases like STUF Q (Ref.11) the only difference is in the material of disc which is tufnol with a thickness from 40 to 60 mm for stamping soaps with band, half dies in brass or copper alloy with cooling circuit and air ejectors, holding plates and all other accessory parts in stainless steel, trimmer mounted on special supports for centering
Cavities: 4
Production capacity
Industrial medium production
Example of mold made by us STUF Q Banded Soap
Heavy weight version for soap with band STUF Q Banded
Soap stamper manufacturer
Mazzoni LB Italy
Stamper model - STUF Duplo [Ref. 13]
Characteristic notes:set of mold with disc die-box in st. steel with eight single openings for stamping bandless soaps, the disc rotates 90 degrees to carry out the soap bar loading phases,stamping and soap unloading, set composed of half dies made of brass or copper alloy with cooling circuit and air ejectors,holding plates in stainless steel, expeller cleaner support and accessories
Cavities: 2
Production capacity
Industrial low production
Example of mold made by us STUF D
Soap stamper manufacturer
Mazzoni LB Italy
Stamper model - Stamper model - STUF Duplo Banded soap [Ref. 14]
Characteristic notes:similar in the rotation movement system to STUF D (Ref.13) but with a rotating disc in tufnol to allow the stamping of soaps with band, half dies in brass or copper alloy with cooling circuit and air ejectors, holding plates and all other accessory parts in stainless steel, trimmer mounted on special supports for centering
Cavities: 2
Production capacity
Industrial low production
Example of mold made by us
Soap stamper manufacturer
Mazzoni LB Italy
Stamper model - STU D [Ref. 15]
Characteristic notes:similar in the rotation movement system to STUF D (Ref.13) but with smaller diameter disc for stamping bandless soaps, the set is composed of a stainless steel disc die-box with eight single openings, two half dies in brass or copper alloy with cooling circuit and air ejectors, holding plates and all other accessory parts in stainless steel, stamping capacity approximately 180 soap bars per minute
Cavities: 2
Production capacity
Industrial low production
Example of mold made by us
Soap stamper manufacturer
Mazzoni LB Italy
Stamper model - STU D One line infeed bar [Ref. 16]
Characteristic notes: STU D mold variant which, thanks to larger loading seats, uses a single soap bar for stamping two bars of soap. The disc die box have double hollow and the half dies can be made of brass or copper alloy with cooling circuit and air ejectors, holding plates and all other accessory parts in stainless steel, stamping capacity approximately 180 soap bars per minute
Cavities: 2
Production capacity
Industrial low production
Example of mold made by us
Soap stamper manufacturer
Mazzoni LB Italy
Stamper model - STU D banded soap [Ref. 17]
Characteristic notes:STU D mold variant for stamping soaps with band,the set is composed of a disc die-box in in Aluminium with bronze sleeve (pocket) and eight openings,four half dies in brass or copper alloy with cooling circuit and air ejectors, holding plates and all other accessory parts in stainless steel, trimmer mounted on special supports for centering
Cavities: 2
Production capacity
Industrial low production
Example of mold made by us
Soap stamper manufacturer
Mazzoni LB Italy
Stamper model - Mazzoni ST A [Ref. 18]
Characteristic notes: set of mold for Mazzoni stamper with one cavity for stamping soaps with band, the set is composed of a lower die-box, internal half dies and upper half die made of brass or copper alloy mounted on the holding plates in stainless steel, the set can be made with cooling circuit based on customer request.
Cavities: 1
Production capacity
Artisanal low production
Example of mold made by us ST A
Soap stamper manufacturer
Mazzoni LB Italy
Stamper model - ST A and STH P [Ref. 19]
Characteristic notes: semi-automatic mold for bandless soap, the set is composed of lower and upper half dies in brass or copper alloy, with the upper one equipped with fixed pins that maintain centering during the stamping phase and an upper plate, while the lower one have a chamfer to facilitate cutting of soap scarps, the set can be made with cooling circuit based on customer request.
Cavities: 1
Production capacity
Artisanal low production
Example of mold made by us
Soap stamper manufacturer
Binacchi & C. Italy
Stamper model - USN 2350E FLEX [Ref. 20]
Characteristic notes: stamper machine and specific mold for the production of soaps with band, special feature of this press is to be able to make weight variation of the soap from the control panel via an actuator that raises or lowers the internal half dies, set of mold composed of two upper half-dies in copper alloy with cooling circuit and air ejectors mounted on anticorodal or brass holding plates with treatment, lower die boxes with internal half dies in copper alloy and holding plates, special frame in brass for soap scraps removal
Cavities:from 5 up to 10
Production capacity
Industrial high production
Example of mold made by us
Soap stamper manufacturer
Binacchi & C. Italy
Stamper model - USN 2700-2750-2800 Series [Ref. 21]
Characteristic notes: double line stamping machine, with a special system that makes the trimmer unnecessary, self-centering quick fixing system of the upper and lower die with O-ring sealing of the cooling and air circuits, the set is composed of two lower and upper half-dies in copper alloy with cooling circuit and air ejectors mounted on anticorodal or brass holding plates with treatment
Cavities:from 8 up to 24
Production capacity
Industrial high production
Example of mold made by us
Soap stamper manufacturer
Binacchi & C. Italy
Stamper model - USN 2600-2650 Series [Ref. 22]
Characteristic notes: double line stamping machine that differs from the larger series for a different fixing system of the holding plates which however remains of the rapid and self-centering type, the sealing of the cooling and air circuits is ensured by o-rings mounted in the plate, the set is composed of two lower and upper half-dies in copper alloy with cooling circuit and air ejectors mounted on anticorodal holding plates with oxidation treatment,special frame in brass for soap scraps removal
Cavities:from 8 up to 18
Production capacity
Industrial high production
Example of mold made by us
Soap stamper manufacturer
Binacchi & C. Italy
Stamper model - USN 2400 [Ref. 23]
Characteristic notes:single-line stamping machine with quick and self-centering fixing system of the upper and lower dies, the connections of the cooling and air circuits take place directly when the plates are fixed to the stamper and the seal is guaranteed by o-rings, the set is composed of two lower and upper half-dies in copper alloy with cooling circuit and air ejectors mounted on anticorodal holding plates with oxidation treatment,special frame in brass for soap scraps removal
Cavities:from 5 up to 10
Production capacity
Industrial high production
Example of mold made by us USN 2400
Soap stamper manufacturer
Binacchi & C. Italy
Stamper model - USN 2150-2200-2350 Series [Ref. 24]
Characteristic notes: single-line stamping machine similar to higher series but smaller in size which maintains a quick and self-centering fixing system of the half dies, direct connections of the cooling and air circuits for fixing the plates to the stamper,the set is composed of two lower and upper half-dies in copper alloy with cooling circuit and air ejectors mounted on anticorodal holding plates with oxidation treatment,special frame in brass for soap scraps removal
Cavities:from 4 up to 9
Production capacity
Industrial medium production
Example of mold made by us USN 2150-2200-2350
Soap stamper manufacturer
Binacchi & C. Italy
Stamper model - USN 400-500 Series [Ref. 25]
Characteristic notes: double line stamping machine with an upper reciprocating die set and two rotating dies mounted on a shaft that rotates 180 degrees, during the stamping phase while in the first half set the soap is stamped, in the second half the soap is unloaded, the connections to the cooling and air circuits are made by mounting the plates to the stamper and guaranteed by o-rings, the set is composed of six half-dies in copper alloy with cooling circuit and air ejectors mounted on brass holding plates with special treatment and two trimmers in brass complete with cooling channels and connectors
Cavities:from 3 up to 8
Production capacity
Industrial high production
Example of mold made by us USN 400-500
Soap stamper manufacturer
Binacchi & C. Italy
Stamper model - USN 100-200-300 Series [Ref. 26]
Characteristic notes:single line stamping machine with similar features to the higher series but smaller in size, the set is composed of one reciprocating die and two rotating dies in copper alloy with cooling circuit and air ejectors mounted on brass holding plates with special treatment and trimmer in brass complete with cooling channels and connectors
Cavities:from 2 up to 6
Production capacity
Industrial low production
Example of mold made by us USN 100-200-300
Soap stamper manufacturer
SAS Italy
Stamper model - SAS Stampex 1-2-3-4-6-8 e Ovalex Series [Ref. 27]
Characteristic notes: single line stamping machine generally identified by the maximum number of cavities (in the image Stampex-4) with similar components,the production capacity ranges from 75 soaps per minute for a single-cavity mold to 560 soaps per minute with an eight-cavity mold, the set is composed of two lower and two upper half-dies in brass or copper alloy with cooling circuit and air ejectors mounted on holding plates in brass with special treatment, trimmer in stainless steel and dowel pins
Cavities:from 3 up to 8
Production capacity
Industrial low-medium-high production
Example of mold made by us Stampex 1-2-3-4-6-8
Soap stamper manufacturer
SAS Italy
Stamper model - SAS Serenia [Ref. 28]
Characteristic notes: specific machine for stamping cubic shaped soaps, the mold allows you to stamp logos on the six faces, the set is composed of a bronze die box in which the four lateral half dies are opened and closed by a steel cam in a synchronized way with the upper and lower dies, the loading and unloading of the soap takes place from the upper side guided by the steel slides with which the box is equipped, the half dies are in brass or copper alloy complete of cooling channels and mounted on holding plates in stainless steel
Cavities: 1
Production capacity
Industrial low production
Example of mold made by us
Soap stamper manufacturer
SAS Italy
Stamper model - SAS Moldex [Ref. 29]
Characteristic notes: single line stamping machine with one upper die and two lower dies mounted on a shaft that rotates 180 degrees so as to always have one half set in the stamping phase while the other is unloaded,the set is composed of three half-dies in copper alloy with cooling circuit and air ejectors mounted on anticorodal holding plates with oxidation treatment and trimmer in stainless steel
Cavities:from 4 up to 8
Production capacity
Industrial medium production
Example of mold made by us
Soap stamper manufacturer
SAS Italy
Stamper model - SAS Cubex [Ref. 30]
Characteristic notes: single line stamping machine specific for cubic shaped soaps, the mold allows you to stamp logos or on the six faces, the set is composed of a two part bronze die box in which a steel drive cam is housed which, synchronized with the movement of the upper and lower dies, allows the simultaneous stamping of the six faces, the half dies are in brass or copper alloy complete of cooling channels and mounted on holding plates in stainless steel , more advanced than the Serenia type, they allow you to stamp up to 60 soaps per minute
Cavities: 1
Production capacity
Industrial low production
Example of mold made by us SAS Cubex
Soap stamper manufacturer
SAS Italy
Stamper model - SAS Cubex Duplex [Ref. 31]
Characteristic notes: double line stamping machine specific for cubic shaped soaps, the bronze die box and all the other components are substantially identical to the single Cubex model (Ref.30) thanks to the doubling of the stamping line it is possible to produce up to 120 cubic soaps per minute
Cavities: 2
Production capacity
Industrial medium production
Example of mold made by us
Soap stamper manufacturer
SAS Italy
Stamper model - SAS Condorex [Ref. 32]
Characteristic notes: single-line stamping machine, the set is composed of lower and upper half-dies in brass or copper alloy with cooling circuit and air ejectors mounted on holding plates in brass with special treatment, trimmer in resin, infeed pusher in resin with silicone rubber suction cup and dowel pins
Cavities:from 2 up to 6
Production capacity
Industrial low production
Example of mold made by us
Soap stamper manufacturer
SAS Italy
Stamper model - SAS Condor Series [Ref. 33]
Characteristic notes:single line stamping machine for a production capacity of 100 to 450 soap bars per minute, the set is composed of one upper die and four lower dies mounted on a rotating shaft with 90 degree steps, with this system each mold simultaneously with the others performs a different phase, loading soap bar, stamping, unloading stamped soap,the half dies are in copper alloy complete of cooling channels and air ejectors, the holding plates are made of stainless steel, trimmer in resin,die centering device and infeed pusher in resin and suction cups support in alumiunim
Cavities:from 2 up to 5
Production capacity
Industrial low-medium-high production
Example of mold made by us SAS Condor
Soap stamper manufacturer
IMSA Italy
Stamper model - Imsa VST 1.6 [Ref. 34]
Characteristic notes: single line stamping machine,the set is composed of lower and upper half-dies in copper alloy with cooling circuit and air ejectors mounted on holding plates in anticorodal with oxidation treatment, trimmer in brass with treatment and dowel pins
Cavities:from 3 up to 8
Production capacity
Industrial medium production
Example of mold made by us VST 1.6
Soap stamper manufacturer
IMSA Italy
Stamper model - Imsa VST 1.3 [Ref. 35]
Characteristic notes: single line stamping machine, very similar to the VST 1.6 (Ref 34) differs for a smaller number of cavities, the set is composed of lower and upper half-dies in copper alloy with cooling circuit and air ejectors mounted on holding plates in anticorodal with oxidation treatment, trimmer in brass with treatment and dowel pins
Cavities:from 2 up to 5
Production capacity
Industrial low production
Example of mold made by us
Soap stamper manufacturer
Soaptec Italy
Stamper model - Soaptec MFS-6-8 Series [Ref. 36]
Characteristic notes: Single-line MFS-6 or double-line MFS-8 stamping machine, the set is composed of upper and lower dies in copper alloy with cooling circuit and air ejectors, holding plates in anticorodal with oxidation treatment, the upper plate is fixed with mechanical clamps that are attached in special niches, trimmer made of brass and dowel pins for centering.
Cavities:from 5 up to 10
Production capacity
Industrial medium-high production
Example of mold made by us MFS-6-8
Soap stamper manufacturer
Soaptec Italy
Stamper model - Soaptec MFS-3-4 Series [Ref. 37]
Characteristic notes: Single-line stamping machine with high speed, up to 70 soap bars per minute, the mold, apart from their reduced length dimensions, are very similar to MFS-6 series (Ref.36) in terms of construction features and materials
Cavities:from 2 up to 6
Production capacity
Industrial medium production
Example of mold made by us MFS-3-4
Soap stamper manufacturer
Soaptec Italy
Stamper model - Soaptec Hexa [Ref. 38]
Characteristic notes: Single line stamping machine specific for cubic shaped soaps is able to stamp up to 65 soap bars per minute with a weight that can reach up to 900g.The set is composed of two-part bronze die-box that houses a steel cam for the movement of the four lateral half dies that act in a synchronized way with the upper and lower dies operated by the stamper, the half dies are made in brass or copper alloy with cooling circuit
Cavities: 1
Production capacity
Industrial medium production
Example of mold made by us Hexa
Soap stamper manufacturer
SELA Germany
Stamper model - Sela SPH 4-8 Duplex series [Ref. 39]
Characteristic notes: Single line SPH or double line SPH Duplex stamping machine uses the system of a single upper die and double lower die mounted on a 180 degree rotating shaft in order to have a stamping phase at the same time as a soap discharge, the set is equipped with a cooling circuit and can be made in copper alloy, the holding plates are in anticorodal with oxidation treatment, the trimmer are in resin material with air channel and there are dowel pins for centering. The set of double line molds (SPH Duplex) is able to produce up to 600 soap bars per minute
Cavities:from 4 up to 10
Production capacity
Industrial medium-high production
Example of mold made by us SPH
Soap stamper manufacturer
SELA Germany
Stamper model - Sela Rotex [Ref. 40]
Characteristic notes: Single line stamping machine,the set is composed of one upper die and four lower dies mounted on a rotating shaft with 90 degree steps, with this system each mold simultaneously with the others performs a different phase, loading soap bar, stamping, unloading stamped soap,the half dies are in copper alloy complete of cooling channels and air ejectors, the holding plates are made of stainless steel, trimmer in resin,die centering device and infeed pusher in resin and suction cups support in alumiunim
Cavities:from 2 up to 5
Production capacity
Industrial low-medium production
Example of mold made by us
Soap stamper manufacturer
SELA Germany
Stamper model - Sela Rapid (bandless soap) [Ref. 41]
Characteristic notes: Single line stamping machine with rotating disc soap handling, the set is made for the production of bandless soap and is composed of no.4 die-box in alluminium with special treatment and two openings to be fixed to the rotating disc of the stamper, 4 half dies with cooling circuit and air ejectors that can be made of brass or copper alloy, holding plates plates in anticorodal with oxidation treatment, high resistance resin trimmer,die centering device and expeller cleaner.
Cavities: 2
Production capacity
Industrial low production
Example of mold made by us Sela Rapid
Soap stamper manufacturer
SELA Germany
Stamper model - Sela Rapid (banded soap) [Ref. 42]
Characteristic notes: Single line stamping machine with rotating disc soap handling, very similar to the version for bandless soap (Ref. 41) it differs for die-box made in bronze and infeed and discharge pushers in stainless steel
Cavities: 2
Production capacity
Industrial low production
Example of mold made by us
Soap stamper manufacturer
Generic pneumatics
Stamper model - 3 cavity pneumatic [Ref. 43]
Characteristic notes: Three-cavity mold, made of brass or copper alloy with interchangeable inserts on both upper and lower parts, the set is equipped with dowel pins and the half dies can be equipped with cooling channels to help soap detach, to complete the set there are stainless steel holding plates
Cavities:from 1 up to 3
Production capacity
High production artisanal
Example of mold made by us
Soap stamper manufacturer
Generic pneumatics
Stamper model - 2 cavity pneumatic [Ref. 44]
Characteristic notes: Two-cavity mold, made of brass or copper alloy with interchangeable inserts on both upper and lower parts, mold centering via resin ring, the half dies are equipped with cooling channels to help soap detachment and to complete the set there are stainless steel holding plates
Cavities:from 1 up to 2
Production capacity
High production artisanal
Example of mold made by us
Soap stamper manufacturer
Generic pneumatics
Stamper model - 1 cavity pneumatic [Ref. 45]
Characteristic notes: One-cavity mold for bandless soap, the set is composed of half dies made in brass or copper alloy complete with interchangeable insert and cooling channels(if required), stainless steel holding plates and dowel pins for centering
Cavities: 1
Production capacity
Low production artisanal
Example of mold made by us 1 cavity pneumatic
Soap stamper manufacturer
Generic pneumatics
Stamper model - 1 cavity pneumatic soap with band [Ref. 46]
Characteristic notes: One-cavity mold for banded soap, the set is composed of lower die box in bronze material with internal half dies in brass or copper alloy, upper half dies with the possibility of having interchangeable inserts for engraving/logo change, upper holding plate in stainless steel, dowel pins for centering. The soap unloading occurs via lower pneumatic piston which raises the internal die pushing out the stamped soap,the cooling systems can be provided to help soap detach.
Cavities: 1
Production capacity
Low production artisanal
Example of mold made by us
Soap stamper manufacturer
Milindia India
Stamper model - Milindia Chhaap 2.0 [Ref. 47]
Characteristic notes: Single line stamping machine,set of mold composed of lower and upper half dies in brass or copper alloy equipped with cooling circuit and air ejectors mounted on anticorodal holding plates with oxidation treatment, trimmer in resin complete with air channels or in brass with cooling system and connectors, dowel pins
Cavities: from 4 up to 8
Production capacity
Industrial medium production
Example of mold made by us Chhaap 2.0
Soap stamper manufacturer
Milindia India
Stamper model - Milindia Chhaap 1.5 [Ref. 48]
Characteristic notes: Single line stamping machine, set of mold constructionally identical to the larger series Chhaap 2.0 (Ref. 47), differs only in the shorter mold length and therefore lower production capacity
Cavities: from 3 up to 6
Production capacity
Industrial medium production
Example of mold made by us
Soap stamper manufacturer
Nantong China
Stamper model - Nantong XLD-480 Series [Ref. 49]
Characteristic notes: Double line stamping machine,set of mold composed of two lower and two upper half dies made of brass or copper alloy complete with cooling circuit and air ejectors, four holding plates in anticorodal with oxidation treatment, trimmer in Euromuntz with special treatment surface complete with cooling channels and connectors, dowel pins
Cavities: from 5 up to 12
Production capacity
Industrial medium-high production
Example of mold made by us XLD-480
Soap stamper manufacturer
Nantong China
Stamper model - Nantong XLD-200 XLD-280 Series [Ref. 50]
Characteristic notes: Single line stamping machine,can perform up to 60 soap bars per minute, set of mold constructionally identical to the larger series XLD-480(Ref. 49) differs only in the shorter mold length and therefore in a smaller number of cavities that can be accommodated
Cavities: from 3 up to 6
Production capacity
Industrial medium production
Example of mold made by us
Soap stamper manufacturer
Limac China
Stamper model - Limac 2000ES [Ref. 51]
Characteristic notes: Single line stamping machine,the set is composed of lower and upper half-dies in copper alloy with cooling circuit and air ejectors mounted on holding plates in anticorodal with oxidation treatment, trimmer in brass with treatment and dowel pins
Cavities:from 3 up to 8
Production capacity
Industrial medium production
Example of mold made by us Limac 2000
Soap stamper manufacturer
Meccaniche Moderne Italy
Stamper model - M. M. Saev duplo [Ref. 52]
Characteristic notes: Double line stamping machine with mold for bandless soap, the set is equipped with cooling circuit and can be made of brass or copper alloy, the holding plates are made of brass with nickel plating treatment, the trimmer are made of stainless steel and the centering is done by special resin ring
Cavities: 2
Production capacity
Industrial low production
Example of mold made by us
Soap stamper manufacturer
Meccaniche Moderne Italy
Stamper model - M. M. Saev duplo [Ref. 53]
Characteristic notes: Double line stamping machine with mold for banded soap, the die-box and the upper dies are equipped with cooling circuit, the internal half dies do not have it, they can be made of brass or copper alloy with interchangable inserts, the holding plates are made of brass with nickel plating treatment, the trimmers are made of stainless steel and the centering is done by special resin ring, it is possible to thicken the internal half dies to change the weight of the soap
Cavities: 2
Production capacity
Industrial low production
Example of mold made by us
Soap stamper manufacturer
Meccaniche Moderne Italy
Stamper model - M. M. Saev [Ref. 54]
Characteristic notes: Single line stamper, mold completely identical to Saev duplo (ref. 52) for bandless soaps
Cavities: 1
Production capacity
Industrial low production
Example of mold made by us M. M. Saev
Soap stamper manufacturer
Binacchi & C. Italy
Stamper model - M. M. Saev [Ref. 55]
Characteristic notes:Single line stamper, mold completely identical to Saev duplo (ref. 53) for banded soaps
Cavities: 1
Production capacity
Industrial low production
Example of mold made by us
Soap stamper manufacturer
Lanzhou (Limac) China
Stamper model - Lanzhou LDX [Ref. 56]
Characteristic notes: Single line stamping machine, the set is composed of one reciprocating die and two rotating dies in copper alloy with cooling circuit and air ejectors mounted on brass holding plates with special treatment and trimmer in brass complete with cooling channels and connectors
Cavities:from 2 up to 6
Production capacity
Industrial medium production
Example of mold made by us
Soap stamper manufacturer
Wuxi Zhongtian China
Stamper model - XLD [Ref. 57]
Characteristic notes: Single-line stamping machine, the set is composed of upper and lower dies in copper alloy with cooling circuit and air ejectors, holding plates in anticorodal with oxidation treatment, trimmer made of brass and dowel pins for centering
Cavities:from 2 up to 6
Production capacity
Industrial low production
Example of mold made by us
Soap stamper manufacturer
Jagdish India
Stamper model - Jagdish [Ref. 58]
Characteristic notes: Single line stamping machine uses the system of a single upper die and double lower die mounted on a 180 degree rotating shaft in order to have a stamping phase at the same time as a soap discharge, the set is equipped with a cooling circuit and can be made in copper alloy, the holding plates are in anticorodal with oxidation treatment, the trimmer are in resin material with air channel and there are dowel pins for centering
Cavities:from 4 up to 10
Production capacity
Industrial medium production
Example of mold made by us
  EUROSTAMPI Srl Via Firenze 1 21057 Olgiate Olona (VA) Italy -P.IVA 00302850128- Tel. +39 0331 630410. Fax +39 0331 631833
  Copyright photo ©Eurostampi srl all images are our property forbidden any use
  All names and trademarks belong to their respective owners